非平稳条件下基于贝叶斯网络的内涝风险评估和管理方法

受非平稳条件因素(如气候变化、城市化)的影响,近几年内涝灾害频发。以Z市某地块为研究区域,借助地理信息系统(ArcGIS)和暴雨雨洪管理模型(SWMM)实现研究区排水管网的水动力模拟。在不同降雨情境下,比较分析现状系统及不同改造方案下的系统溢流量等信息,计算内涝风险指数。采用贝叶斯网络分析工具(Bayes Server)对引发内涝风险的主要因素进行推理、识别和分析,进而构建内涝风险评估模型。该模型便于决策者根据设计需求,结合各因素的不确定性范围和发生概率值,综合选取最适合的改造措施,优化市政排水防涝规划,为市政基础设施建设提供了依据。     

液压阻尼孔的宽温度范围流动特性试验研究

研制一种适合对各种液压孔口或缝隙进行高低温流体力学试验的新型试验装置，运用该装置对具有不同几何参数的液压阻尼孔进行在-50~80℃宽温度范围内的流动特性试验，研究以普通抗磨液压油HM46和低温抗凝减振器油TITAN SAF 5045为工质及其温度变化时对液压阻尼孔流量-压力特性曲线、幂指数和流量系数的影响，研究表明，在低温条件下，液压阻尼孔的流量系数均因油液黏度增大、流动性变差而呈线性下降的趋势，从宏观上看，HM46通过液压阻尼孔时的流动稳定性较差，其对应流量系数的下降幅度明显大于TITAN SAF 5045对应的下降幅度，厚壁小孔流量系数的下降幅度明显大于薄壁小孔对应的下降幅度。研究所获得的新型试验装置、试验数据分析方法和具体理论公式为深入研究和优化现代液压元件在宽温度范围内的动态性能提供新型试验平台与理论基础。     

融合前沿研究的液体电介质击穿教学研究

针对《高电压与绝缘技术》课程中液体电介质的教学难点，提出了融合前沿研究的液体电介质击穿教学方法。基于前沿的液体放电应用背景与先进的液体放电研究平台，形象地展示液体电介质的动态击穿过程，在教学内容、教学方法、考核方式等方面进行科教融合改进，实施“以学生为中心”理念的课程教学设计。该教学方式取得了较好的教学效果，能够为其它知识点的教学质量提升提供参考。     

Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization

In this study, as alternative methods to conventional production methods involving thin section copper permanent mould casting (fast solidification) and water atomization (rapid solidification) of AISI DC 53 cold work tool steel have been investigated. Thin slabs obtained by copper mould casting was homogenized at 1150 °C for one hour and then hot rolling was be applied. After hot rolling, conventional heat treatment have been applied to thin slabs. The same heat treatment procedure have been performed for a commercially available AISI DC 53 which is manufactured by thick section ingot casting and rolling. In order to investigate also the effect of rapid solidification on AISI DC 53 tool steel, steel powder was produced by water atomization technique. Experiments have revealed that thin steel slabs in permanent copper mould and rapidly solidified tool steel powder by water atomization have a more refined primary M₇C₃ carbides than commercially available steel.     

气体开关串级环形间隙放电相互影响机制研究

针对中空和非中空触发电极结构的两间隙开关，进行了触发击穿特性实验，对比两个间隙的击穿抖动和通道数，分析了串级两间隙的相互影响机制。实验结果表明：两只开关触发间隙击穿抖动和通道数变化规律基本一致；非中空开关自击穿间隙击穿抖动随工作系数的增大而减小，最小约3 ns，中空开关自击穿间隙击穿抖动始终约1 ns；非中空开关自击穿间隙难形成多通道放电，中空开关自击穿间隙通道数明显多于其他间隙。触发间隙首先放电产生紫外光，通过触发电极中空通孔预先照射自击穿间隙产生初始电子，是自击穿间隙击穿抖动减小、通道数增加的主要作用机制。     

A priori risk-informed approach to ensure the compliance with discharge limits for liquid radioactive effluent to be discharged from APR 1400

ABSTRACT

In order to develop a methodology to guarantee the conformance to operational discharge limits for liquid effluent from a NPP at an early stage of design, a risk-informed approach was proposed and its applicability was verified for APR 1400. Existing methodology to calculate risk-based detection limit for a single radionuclide was improved by incorporating a new model to derive more realistic pathway dose factors. A new simple expression was also proposed to adjust risk-based detection limits for multiple radionuclides mixture if necessary. In addition, a new procedure to warrant the compliance with discharge limits by controlling detection limits of only a few principal radionuclides was established in accordance with risk-informed concept. Through case studies for APR 1400 to be commissioned at a hypothetical site, it was shown that calculated pathway dose factors are more realistic for majority of radionuclides. It also turns out that neither present detection limits nor unadjusted risk-based detection limits can be justified when the radionuclide composition is unknown, however further adjustment of detection limits or increasing additional dilution factor resolves the problem. Finally, ten principal radionuclides were identified and shown to be enough for liquid effluent control at APR 1400 from a risk-informed point of view.     

Investigations of geometrical structure and morphology of samples made of hard machinable materials after wire electrical discharge machining and vibro‐abrasive finishing

In this article the results concerned influence of processing conditions of the wire electrical discharge machining and vibro‐abrasive machining on the surface layer and morphology of samples made of hard machinable materials used in aircraft industry like: Titanium 5553 β, Inconel 617, Hastelloy X and Magnesium AZ31 have been presented. For this purpose the cubic and cylindrical samples made of hard machinable alloys have been prepared using optimal electric parameters of wire‐cut electrical discharge machining and finally they have been polished using circular vibratory finishing technology and different ceramic shaped stones.     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

Effects of temperature on creepage discharge characteristics in oil-impregnated pressboard insulation under combined AC–DC voltage

Due to the complexity of the valve side winding voltage of the converter transformer, the insulation characteristics of the oil-impregnated pressboard (OIP) of the converter transformer are different from those of the traditional AC transformer. The study on effect of temperature on the creeping discharge characteristics of OIP under combined AC–DC voltage is seriously inadequate. Therefore, this paper investigates the characteristics of OIP creepage discharge under combined AC–DC voltage and discusses the influence of temperature on creepage discharge characteristics under different temperatures from 70°C to 110 °C. The experimental results show that the partial discharge inception voltage and flashover voltage decrease with increasing temperature. The times of low amplitude discharge (LAD) decrease and amplitude of LAD increases. Simultaneously, the times of high amplitude discharge (HAD) gradually increase at each stage of creepage discharge with higher temperature. The analysis indicates that the charge carriers easily accumulate and quickly migrate directional movement along the electric field ahead of discharging. The residual charge carriers are more easily dissipated after discharging. The ‘hump’ region of LAD moves to the direction of higher discharge magnitude. The interval time between two continuous discharges is shortened obviously. The concentration of HAD accelerates the development of OIP insulation creepage discharge. The temperature had an accelerating effect on the development of discharge in the OIP under applying voltage.     

A multiagent‐based microgrid operation method considering charging and discharging strategies of electric vehicles

In this paper, we propose a multiagent‐based microgrid (MG) operation method considering charging and discharging electric vehicles (EVs). The proposed system consists of five types of agents: single microgrid controller agent, several load agents, several gas turbines/engine agents, several photovoltaic generation agents, and several electric vehicle agents. In the proposed method, the load balancing can be realized by suppressing sudden fluctuations in supply and demand balance due to the synchronization of charging and discharging of EVs. From the simulation results, it can be seen that the proposed multiagent system could realize the load equalization in MG.